211 Silicone O-Ring, 70A Durometer, Red, 13/16″ ID, 1-1/16″ OD, 1/8″ Width Pack of 5

#ad
#ad
Small Parts 211 #ad - Shore durometer is the hardness of a material, and its resistance to permanent indentation. Silicone is vulnerable to mechanical wear and tear, chlorinated hydrocarbons trichloroethylene, acids and bases, aromatic hydrocarbons benzene, water and steam over 250 degrees F 121 degrees C, and hydrocarbon fuels.

O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter ID, outer diameter OD, and cross-sectional CS diameter. Made of silicone for use with a variety of chemicals and fluids. Meets standards defined by Aerospace Standard AS568A. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

211 Silicone O-Ring, 70A Durometer, Red, 13/16" ID, 1-1/16" OD, 1/8" Width Pack of 5 #ad - Durometer hardness of 70A for resistance to penetration. Silicone is acceptable for temperature applications between -65 degrees F -54 degrees C to 450 degrees F 232 degrees C. It has good resistance to ozone, salt water, vegetable and animal oils, detergent, engine and transmission oil, hydraulic fluids that resist fire, weather, non-petroleum brake fluid, and high molecular weight chlorinated aromatic hydrocarbons.

This silicone o-ring is red in color, has a durometer of 7OA, round in shape, and is designed for use in a wide variety of sealing applications. This silicone o-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, valves, flanges, and various cylinders.

More information about Small Parts 211 #ad

Stainless Steel 304 Cast Pipe Fitting, Hex Locknut, MSS SP-114, 1/2" NPT Female

#ad
#ad
Merit Brass M419-08 #ad - This fitting meets standards MSS SP-114, ANSI B1. 201, and astm a351 for quality assurance. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Made of stainless steel 304, the lower carbon content of this locknut ensures higher corrosion resistance than 302 grade steel.

The hexagonal shape provides increased leverage for use with a wrench during installation and disassembly. Family-owned since 1937, the company is based in Cleveland, OH. Merit brass distributes pipe fittings to the United States and Canada. Low carbon content to ensure greater resistance to corrosion. Female national pipe Taper NPT threads for use with male threaded pipes and fittings.

Stainless Steel 304 Cast Pipe Fitting, Hex Locknut, MSS SP-114, 1/2" NPT Female #ad - The locknut has NPT threads for creating tighter seals than straight threads. Meets standards mss sp-114, ansi b1. 201, and astm a351 for quality assurance. Fittings are available threaded or unthreaded, styles, sizes, in many shapes, and schedules pipe wall thickness. Hex locknut locks two threaded fittings into place for stability and reduced vibrations.

The merit brass hex locknut is a stainless steel 304 cast pipe fitting with female National Pipe Taper NPT threads locking two fittings into place for stability and reduced vibrations.

More information about Merit Brass M419-08 #ad


Similar products



Dernord Cast Pipe Fitting Stainless Steel 304 Hex Locknut 1 Inch NPT Female Pack of 2

#ad
#ad
Dernord #ad - Low carbon content to ensure greater resistance to corrosion. Product features dernord stainless steel 304 cast pipe fitting with female National Pipe Taper NPT threads locking two fittings into place for stability and reduced vibrations. Female national pipe Taper NPT threads for use with male threaded pipes and fittings.

Made of stainless steel 304 for greater strength than 302 grade steel. From the manufacturer dernord a lock nut which has NPT threads for creating tighter seals than straight threads is used for fastening to a bolt when mechanically joining materials together and preventing loosening from vibration or back off.

Dernord Cast Pipe Fitting Stainless Steel 304 Hex Locknut 1 Inch NPT Female Pack of 2 #ad - Made of stainless steel 304 for better strength. The hexagonal shape provides increased leverage for use with a wrench during installation and disassembly. Higher corrosion resistance than the 302 grade stainless steel. Male national pipe Taper NPT threads on male threaded pipes and fittings. Preventing rust processes and for the whole body.

. Keep stable and reducing vibrations. Meets standards mss sp-114, ansi b1. 20

More information about Dernord #ad


Similar products



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.075" Thickness, 1-1/2" ID, 2-1/4" OD

#ad
#ad
Small Parts 188SS2592 #ad - Meets astm a666 specifications. Hex locknut locks two threaded fittings into place for stability and reduced vibrations. Keep stable and reducing vibrations. Low carbon content to ensure greater resistance to corrosion. It may be slightly magnetic. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium.

Hardness commonly measured as indentation hardness describes its resistance to permanent surface deformation. Made of stainless steel 304 for greater strength than 302 grade steel. Unpolished mill surface has no finish. Made of stainless steel 304 for better strength. Shapes include round, notched, and slotted.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.075" Thickness, 1-1/2" ID, 2-1/4" OD #ad - They also can be used to fill gaps between machine parts that are prone to wear. The 18-8 stainless steel material offers good resistance to corrosion and high temperatures. Meets standards mss sp-114, ansi b1. 201, and astm a351 for quality assurance. Standard tolerance.

More information about Small Parts 188SS2592 #ad


Similar products



Twowings 4546 ERE Foldback Water Heater Element with Low Watt Density 120v 1500w ASIN: B018S4AP5Y View on Amazon, Silver

#ad
#ad
Twowings 4546 #ad - Meets astm a666 specifications. Fits most water Heater Models of American. Foldback water Heater Element is easy to Install. Low watt density Stainless Steel Foldback Water Heater Element. Keep stable and reducing vibrations. Foldback water heater Element provides 1500w 120v of power. Element is folded back to minimize length and maximize heated surfaces.

18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Preventing rust processes and for the whole body. Technical details Item Weight: 9. 2 ounces origin: china color: silver voltage: 120 volts item package Quantity: 1 Mounting Type: Threaded Screw Type:1”NPSM Hex locknut locks two threaded fittings into place for stability and reduced vibrations.

Twowings 4546 ERE Foldback Water Heater Element with Low Watt Density 120v 1500w ASIN: B018S4AP5Y View on Amazon, Silver #ad - Low carbon content to ensure greater resistance to corrosion. Unpolished mill surface has no finish. Made of stainless steel 304 for better strength. Higher corrosion resistance than the 302 grade stainless steel. Female national pipe Taper NPT threads for use with male threaded pipes and fittings. Standard tolerance.

More information about Twowings 4546 #ad


Similar products



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 1-1/8" ID, 1-5/8" OD Pack of 5

#ad
#ad
Small Parts 188SS1401 #ad - Unpolished mill surface has no finish. The 18-8 stainless steel round shim has an unpolished mill surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance. It may be slightly magnetic. Element is folded back to minimize length and maximize heated surfaces.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Shims are thin pieces of material placed between objects for a variety of uses, increased insulation, improved leveling, tighter seals, including added support, or better spacing.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 1-1/8" ID, 1-5/8" OD Pack of 5 #ad - Low watt density Stainless Steel Foldback Water Heater Element. Made of stainless steel 304 for greater strength than 302 grade steel. They also can be used to fill gaps between machine parts that are prone to wear. Meets astm a666 specifications. Low carbon content to ensure greater resistance to corrosion. Keep stable and reducing vibrations.

Hardness commonly measured as indentation hardness describes its resistance to permanent surface deformation. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Made of stainless steel 304 for better strength.

More information about Small Parts 188SS1401 #ad


Similar products



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10

#ad
#ad
Small Parts 188SS1399 #ad - Unpolished mill surface has no finish. Unpolished mill surface has no finish. The 18-8 stainless steel round shim has an unpolished mill surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance. Made of stainless steel 304 for better strength.

Fits most water Heater Models of American. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. It may be slightly magnetic. Shims are thin pieces of material placed between objects for a variety of uses, including added support, tighter seals, improved leveling, increased insulation, or better spacing.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10 #ad - Shapes include round, notched, and slotted. Meets astm a666 specifications. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Higher corrosion resistance than the 302 grade stainless steel. Meets astm a666 specifications. Female national pipe Taper NPT threads for use with male threaded pipes and fittings.

Preventing rust processes and for the whole body. Foldback water Heater Element is easy to Install.

More information about Small Parts 188SS1399 #ad


Similar products



Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White

#ad
#ad
Dernord #ad - Standard tolerance. Meets astm a666 specifications. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Low watt density Stainless Steel Immersion Ripple Foldback heating element. Female national pipe Taper NPT threads for use with male threaded pipes and fittings. Resists dry firing, lime deposits, and sand that would burn out ordinary elements.

The type of element is to minimize length and maximize the heated surface. It provides uniform heat distribution and offered long performance life, and fits more models of American, Craftmaster, for Bradford White, General Electric and Whirlpool heaters. Standard tolerance. Unpolished mill surface has no finish.

Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White #ad - Meets astm a666 specifications. Technical details Item Weight: 16. 9ounces origin: china color: white tube length: 333mm tube diameter: 8mm Item Package Quantity: 1 Mounting Type: Threaded Hex locknut locks two threaded fittings into place for stability and reduced vibrations. Unpolished mill surface has no finish.

Foldback water Heater Element is easy to Install. Fits most water Heater Models of American.

More information about Dernord #ad


Similar products



Dernord 120V 1650W Foldback Water Heater Element Screw-In Lime Life Heating Element with Low Watt Density

#ad
#ad
DERNORD #ad - Meets astm a666 specifications. Resists dry firing, lime deposits, and sand that would burn out ordinary elements. Meets astm a666 specifications. Low watt density Stainless Steel Foldback Water Heater Element. Higher corrosion resistance than the 302 grade stainless steel. Standard tolerance. Unpolished mill surface has no finish.

Standard tolerance. Standard tolerance. Low watt density Stainless Steel Foldback Water Heater Element. Low watt density Stainless Steel Immersion Ripple Foldback heating element. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Resists dry firing, lime deposits, and sand that would burn out ordinary elements.

Dernord 120V 1650W Foldback Water Heater Element Screw-In Lime Life Heating Element with Low Watt Density #ad - Technical details Item Weight: 11. 45 ounces origin: china color: white tube length: 250mm tube diameter: 8mm Item Package Quantity: 1 Mounting Type: Threaded Hex locknut locks two threaded fittings into place for stability and reduced vibrations. Unpolished mill surface has no finish. Female national pipe Taper NPT threads for use with male threaded pipes and fittings.

18-8 stainless steel round shim provides good resistance to corrosion and high temperatures.

More information about DERNORD #ad


Similar products



Dernord 240V 5500W Ripple Water Heater Element Screw-In Lime Life - Ultra Low Watt Density

#ad
#ad
DERNORD #ad - Male national pipe Taper NPT threads on male threaded pipes and fittings. Meets astm a666 specifications. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Foldback water heater Element provides 1650w 120v of power. Fits most water Heater Models of American. Foldback water heater Element provides 1500w 120v of power.

Resists dry firing, lime deposits, and sand that would burn out ordinary elements. Easy to install and fits most Water Heater Models of American. Element is folded back to minimize length and maximize heated surfaces. Product features 5500w element : replacement american standard water heater parts From the Manufacturer Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications.

Dernord 240V 5500W Ripple Water Heater Element Screw-In Lime Life - Ultra Low Watt Density #ad - 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Element is folded back to minimize length and maximize heated surfaces. Low watt density Stainless Steel Immersion Ripple Foldback heating element. The element is folded back to minimize length and maximize the heated surface.

It provides uniform heat distribution and offered long performance life, Craftmaster, for Bradford White, and fits more models of American, General Electric and Whirlpool heaters. Keep stable and reducing vibrations.

More information about DERNORD #ad


Similar products



Merit Brass 4008-001-10 Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length Pack of 10

#ad
#ad
Merit Brass 4008-001-10 #ad - Made of stainless steel 304 for greater strength than 302 grade steel. Resists dry firing, lime deposits, and sand that would burn out ordinary elements. Low carbon content to ensure greater resistance to corrosion. Element is folded back to minimize length and maximize heated surfaces. Made of stainless steel 304L for strength.

The merit brass nipple is a schedule 40 welded stainless steel 304/304L pipe fitting with male National Pipe Taper NPT threads for connecting and extending female threaded pipes. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Made of stainless steel 304 for better strength.

Merit Brass 4008-001-10 Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length Pack of 10 #ad - Low watt density Stainless Steel Foldback Water Heater Element. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. Unpolished mill surface has no finish. Unpolished mill surface has no finish. Meets astm a666 specifications. Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries.

Standard tolerance.

More information about Merit Brass 4008-001-10 #ad


Similar products