Kreg KMA2685 Circular Saw Guide

#ad
#ad
Kreg KMA2685 #ad - With a built-in measuring scale, you don’t have to measure and mark each cut, either. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Take your saw to the material instead of having to take your material to the saw. Turn an ordinary circular saw into a precision edge-guided cutting toolgreat projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your circular saw plus the Rip-Cut Circular Saw Edge Guide.

The kreg rip-cut turns your circular saw into a precision edge-guided cutting tool that makes straight, repeatable cuts in plywood, MDF, accurate, and other large sheets. After a simple one-time calibration, you can lock in your cut width up to 24" using the measuring scale and precision cursor. With the rip-cut, you can cut with the confidence you want and the precision you need.

Kreg KMA2685 Circular Saw Guide #ad - The rip-cut easily makes straight, marking, repeatable cuts without measuring, accurate, or having to keep the saw on the cut line. Eliminate need for marking, measuring, and layout lines. Use the oversize edge guide for precise control throughout the cut. Make rip cuts and crosscuts up to 24" wide. Plus, the rip-cut makes it easier to cut down large sheets by yourself.

The rip-cut is very easy to use.

More information about Kreg KMA2685 #ad

Kreg KMA2700 Circular Saw Track

#ad
#ad
Kreg KMA2700 #ad - Kreg kma2700 circular saw track rip, mdf, and make angled cuts up to 48" long in plywood, crosscut, and panels. Simply align the guide track with your marks to make accurate cuts. Hold track in place without Clamps thanks to Anti-slip guide strips. Prevent splintering with anti-chip strips that support material during the cut.

. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

More information about Kreg KMA2700 #ad


Similar products



Kreg KMA2600 Square-Cut

#ad
#ad
Kreg KMA2600 #ad - Kreg kma2600 square-cut, crosscut, 1/2" wide Rip, mdf, and make angled cuts up to 48" long in plywood, and panels. Simply align the guide track with your marks to make accurate cuts. Switch back and forth between any circular or jig saw. Prevent splintering with anti-chip strips that support material during the cut.

Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Adjustable arm requires no trimming. Built-in roof pitch scale for cutting siding. Supports work pieces up to 12-Inch wide. Hold track in place without Clamps thanks to Anti-slip guide strips. Low-profile design won't interfere with saw.

More information about Kreg KMA2600 #ad


Similar products



Kreg KMA3700 ACCU-Cut XL

#ad
#ad
Kreg KMA3700 #ad - The anti-chip guide strips prevent splintering and Tearout through the entire length of your cut. Break down panels and plywood easily and quickly with cutting capacity up to 100". It rips, mdf, and makes angled cuts up to 100" Long in plywood, crosscuts, and other large panels with accuracy and control.

Rip, mdf, crosscut, and make angled cuts up to 48" long in plywood, and panels. Simply align the guide track with your marks to make accurate cuts. Built-in roof pitch scale for cutting siding. Easily attaches to your left-blade or right-blade circular saw, and removes easily. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

Kreg KMA3700 ACCU-Cut XL #ad - Supports work pieces up to 12-Inch wide. Adjustable arm requires no trimming. Low-profile design won't interfere with saw. Make the cuts you need - anywhere - by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Splinter-free cuts with tear-out protection from anti-chip guide strips.

Hold track in place without Clamps thanks to Anti-slip guide strips. The same strips also feature an anti-slip surface that holds the track in place without clamps.

More information about Kreg KMA3700 #ad


Similar products



Kreg KHCRA Automaxx Right Angle Clamp

#ad
#ad
KREG TOOL KHCRA #ad - Splinter-free cuts with tear-out protection from anti-chip guide strips. Built-in roof pitch scale for cutting siding. Hold track in place without Clamps thanks to Anti-slip guide strips. Pin on one jaw fits into the pocket hole, while a swiveling pad on the other jaw holds the mating piece. No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut.

Prevent splintering with anti-chip strips that support material during the cut. Low-profile design won't interfere with saw. The quick, easy way to hold pocket-hole joints at 90 Degree during project assembly-now with Automaxx technology. Easily attaches to your left-blade or right-blade circular saw, and removes easily.

Kreg KHCRA Automaxx Right Angle Clamp #ad - Supports work pieces up to 12-Inch wide. Switch back and forth between any circular or jig saw. Kreg khcra automaxx right angle clamp rip, and make angled cuts up to 48" long in plywood, crosscut, mdf, and panels. Simply align the guide track with your marks to make accurate cuts. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

Adjustable arm requires no trimming. Break down panels and plywood easily and quickly with cutting capacity up to 100".

More information about KREG TOOL KHCRA #ad


Similar products



Kreg KHC-PREMIUM Face Clamp

#ad
#ad
Kreg KHC-PREMIUM #ad - Prevent splintering with anti-chip strips that support material during the cut. Used primarily for securing Individual Joints While Pocket-Screws Are Being Driven. Best for a majority Of Pocket-Screw Applications. Adjustable arm requires no trimming. Used primarily for securing individual joints while Pocket-Screws are being driven.

Break down panels and plywood easily and quickly with cutting capacity up to 100". Splinter-free cuts with tear-out protection from anti-chip guide strips. Easily attaches to your left-blade or right-blade circular saw, and removes easily. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

Kreg KHC-PREMIUM Face Clamp #ad - Pin on one jaw fits into the pocket hole, while a swiveling pad on the other jaw holds the mating piece. Unique clamp designed Specifically For Pocket-Screw Joinery. Hold track in place without Clamps thanks to Anti-slip guide strips. The quick, easy way to hold pocket-hole joints at 90 Degree during project assembly-now with Automaxx technology.

Supports work pieces up to 12-Inch wide. Clamp can also be used to secure Portable Kreg Jigs To The Work Piece. The large face of the clamp keeps the joint perfectly flush.

More information about Kreg KHC-PREMIUM #ad


Similar products



KREG KMA3200 Shelf Pin Drilling Jig

#ad
#ad
Kreg KMA3200 #ad - The quick, easy way to hold pocket-hole joints at 90 Degree during project assembly-now with Automaxx technology. Break down panels and plywood easily and quickly with cutting capacity up to 100". Hardened steel drill guides ensure precise drilling. A locating pin helps you quickly reference the same mark every time.

Switch back and forth between any circular or jig saw. Includes shelf-pin jig, jig extender, locating pin, depth collar, Allen wrench, instruction manual, 1/4-Inch drill bit, and four 1/4-Inch shelf pins. Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size.

KREG KMA3200 Shelf Pin Drilling Jig #ad - Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Locating pin lets you quickly reference last hole drilled. The large face of the clamp keeps the joint perfectly flush. Used primarily for securing individual joints while Pocket-Screws are being driven. Low-profile design won't interfere with saw.

Adjustable arm requires no trimming. Hold track in place without Clamps thanks to Anti-slip guide strips. Kreg kma3200 shelf pin drilling jig rip, crosscut, mdf, and make angled cuts up to 48" long in plywood, and panels.

More information about Kreg KMA3200 #ad


Similar products



Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes

#ad
#ad
Kreg SK03 #ad - The quick, easy way to hold pocket-hole joints at 90 Degree during project assembly-now with Automaxx technology. Used primarily for securing individual joints while Pocket-Screws are being driven. Includes shelf-pin jig, depth collar, allen wrench, instruction manual, 1/4-Inch drill bit, jig extender, locating pin, and four 1/4-Inch shelf pins.

Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size. Hardened steel drill guides ensure precise drilling. 2 square drive. Design reaches into pocket holes on the inside or outside of 90 Degree case assemblies.

Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes #ad - Unique clamp designed specifically for Pocket-Screw Joinery. Switch back and forth between any circular or jig saw. No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut. Supports work pieces up to 12-Inch wide. Splinter-free cuts with tear-out protection from anti-chip guide strips.

The large face of the clamp keeps the joint perfectly flush. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. This jig from kreg offers hardened steel drill guides to make sure you're on the mark every time.

More information about Kreg SK03 #ad


Similar products



Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool

#ad
#ad
Kreg KMA2900 #ad - Design reaches into pocket holes on the inside or outside of 90 Degree case assemblies. Unique clamp designed specifically for Pocket-Screw Joinery. Make the cuts you need - anywhere - by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Hold track in place without Clamps thanks to Anti-slip guide strips.

The multi-mark features three different scale configurations, a built-in level, a handy 3/16-Inch reveal gauge. Perfect for general layout. Contains 675 of 5 most used screws. Break down panels and plywood easily and quickly with cutting capacity up to 100". Low-profile design won't interfere with saw. Locating pin lets you quickly reference last hole drilled.

Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool #ad - The kreg multi-mark is an incredibly handy multi-purpose marking and measuring tool, perfect for a wide variety of household and jobsite applications. 3 unique scale positions. No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut. Switch back and forth between any circular or jig saw.

3/16-inch offset for door trim. Adjustable arm requires no trimming.

More information about Kreg KMA2900 #ad


Similar products



Kreg KWS1000 Mobile Project Center,

#ad
#ad
Kreg Tool Company KWS1000 #ad - No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut. Supports work pieces up to 12-Inch wide. Easily attaches to your left-blade or right-blade circular saw, and removes easily. Rip, and make angled cuts up to 48" long in plywood, mdf, crosscut, and panels.

Simply align the guide track with your marks to make accurate cuts. The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge. Auto-adjust bench Clamp and 4 bench dogs included. The large face of the clamp keeps the joint perfectly flush. Plus, so it’s ready to go to work, the Mobile project center includes $40 worth of bonus clamping accessories, right out of the box.

Kreg KWS1000 Mobile Project Center, #ad - Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Hole pattern on tables accept bench dogs and other Accessories. 2 square drive. The perfect drill guide for shelving, whether you're building from scratch or adding to existing furniture. Includes shelf-pin jig, jig extender, allen wrench, locating pin, depth collar, instruction manual, 1/4-Inch drill bit, and four 1/4-Inch shelf pins.

Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size. Switch back and forth between any circular or jig saw.

More information about Kreg Tool Company KWS1000 #ad


Similar products



Kreg Tool Company KHI-SLIDE Drawer Slide Jig

#ad
#ad
Kreg KHI-SLIDE #ad - Easily attaches to your left-blade or right-blade circular saw, and removes easily. Adjustable arm requires no trimming. Low-profile design won't interfere with saw. Design reaches into pocket holes on the inside or outside of 90 Degree case assemblies. Unique clamp designed specifically for Pocket-Screw Joinery.

. Hole pattern on tables accept bench dogs and other Accessories. Cumulative scale for transferring measurements. Kreg tool company khi-slide drawer slide jig Rip, mdf, crosscut, and make angled cuts up to 48" long in plywood, and panels. Simply align the guide track with your marks to make accurate cuts. Includes a durable easy-to-carry case.

Kreg Tool Company KHI-SLIDE Drawer Slide Jig #ad - The perfect drill guide for shelving, whether you're building from scratch or adding to existing furniture. Versatile for use in cabinets, cases, and more. From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking. Pin on one jaw fits into the pocket hole, while a swiveling pad on the other jaw holds the mating piece.

Connect multiple jigs together with the jig extender. Break down panels and plywood easily and quickly with cutting capacity up to 100". Includes self-tapping screw sizes for pocket-screw joinery.

More information about Kreg KHI-SLIDE #ad


Similar products