Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4″ x 2-7/8″, 5 Microns

#ad
#ad
Pentair Industries 1/2" 3G Slim Line BSP #ad - The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%. H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns #ad - Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

SpecificationsNominal filtration rating5 micronsInitial pressure drop at 1 gpm3. 4 psichlorine reduction capacity6, 000 gallons at 1 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w9-3/4 x 2-7/8 inches 248 x 73 mmMaterials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

More information about Pentair Industries 1/2" 3G Slim Line BSP #ad

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns

#ad
#ad
Pentair Industries EPM-10 #ad - The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 90% in up to 3, 000 gallons at a flow rate of 1 gallon per minute gpm. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Temperature range of 40 to 180 degrees F 4.

4 to 82. 2 degrees C. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specificationsnominal filtration rating10 micronsInitial pressure drop at 1 gpm1. 5 psichlorine reduction capacity3, 000 gallons at 1 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w9-3/4 x 2-7/8 inches 248 x 73 mmMaterials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns #ad - They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. The cartridge has an initial pressure drop of 1. 5 pounds per square inch psi at a flow rate of 1 gallon per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4.

More information about Pentair Industries EPM-10 #ad


Similar products



Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
#ad
Pentair Industries CBC-10 #ad - Bonded pac media with polyolefin wraps and polyethylene netting. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. This pentek cbc-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%.

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes.

It has a nominal 85% filtration rating of 05 micron, and 99. 95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine fac at 2 parts per million ppm by at least 90% in up to 20, 000 gallons at a flow rate of 2 gallons per minute gpm. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Pentair Industries CBC-10 #ad


Similar products



Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron

#ad
#ad
Pentair Industries ChlorPlus-10 #ad - Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Nominal filtration rating of 05 micron. The cartridge is made of bonded powdered activated carbon PAC media with a polyolefin core and shell and polyethylene outer netting. A santoprene gasket provides a watertight seal. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 75%.

For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron #ad - This pentek chlorplus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The filter has an initial pressure drop of 6 pounds per square inch psi at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F 4.

More information about Pentair Industries ChlorPlus-10 #ad


Similar products



Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns

#ad
#ad
Pentair Industries PD-1-934 #ad - This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm.

It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. This pentek pd-5-934 polypropylene filter cartridge reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications.

Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns #ad - It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

More information about Pentair Industries PD-1-934 #ad


Similar products



Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8"

#ad
#ad
Pentair Industries GAC-10 #ad - Bonded pac media with a polyolefin core and shell. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Bonded pac media with polyolefin wraps and polyethylene netting.

Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. The pentek-gac-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. Ideal for general-purpose water filtration. Reduces chlorine and chloramines in residential and commercial drinking water.

Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8" #ad - Nominal filtration rating of 1 micron. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

More information about Pentair Industries GAC-10 #ad


Similar products



Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron

#ad
#ad
Pentair Industries C1 #ad - Nominal filtration rating of 1 micron. This filter cartridge meets national sanitation foundation/american National Standards Institute NSF/ANSI standard 42 for quality assurance, and is for use in various applications, laboratory water treatment, including drinking water purification, and film processing, among others .

Specifications nominal filtration rating 5 microns Chlorine reduction capacity 2500 gallons at 1 gpm Initial pressure drop at 5 gpm 4 psi Operating temperature range 40 to 125 degrees F 4. 4 to 51. 7 degrees c maximum dimensions h x w 9-3/4 x 2-1/2 inches 248 x 64 mm Materials certification NSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Nominal filtration rating of 05 micron. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity.

Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron #ad - The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

More information about Pentair Industries C1 #ad


Similar products



Pentek WS-10 Water Softener 10”Cartridge, 155319-43

#ad
#ad
Pentek WS-10 #ad - Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Maximum temperature of 100 degrees F 37. 8 degrees C. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity.

Bonded polypropylene microfiber for resistance to chemicals and bacteria. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Initial pressure drop of 6 psi at a flow rate of 1 gpm. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Pentek WS-10 Water Softener 10”Cartridge, 155319-43 #ad - Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Nominal filtration rating of 10 microns. Recommended flow rate of 050 gpm. Temperature range of 40 to 125 degrees F 4. 4 to 51.

More information about Pentek WS-10 #ad


Similar products



Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron

#ad
#ad
Pentair Industries CC-10 #ad - Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. This filter cartridge meets national sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is for purification of residential and commercial drinking water.

Specifications nominal filtration rating 20 microns Initial pressure drop at 1 gpm 4. 5 psi chlorine reduction* 7500 gallons at 1 gpm Operating temperature range 40 to 125 degrees F 4. 4 to 51. 7 degrees c maximum dimensions h x w 9-3/4 x 2-7/8 inches 248 x 73 mm Materials certification NSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Initial pressure drop of 4 psi at a flow rate of 5 gpm. Bonded polypropylene microfiber for resistance to chemicals and bacteria. It will reduce free available chlorine fac at 2 parts per million ppm by at least 75% in up to 7500 gallons at a flow rate of 1 gallon per minute gpm.

Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C.

More information about Pentair Industries CC-10 #ad


Similar products



Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings

#ad
#ad
Pentair Industries 150578 #ad - This pentek 150578 mc-1a bracket is used to mount filter housings on a vertical surface. Granular activated carbon GAC media with polystyrene outer casing and end caps. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 6 psi at a flow rate of 1 gpm.

Reduces hardness minerals and scale deposits in low flow rate residential and commercial applications. Designed for maximum adsorption with post-filter to reduce carbon fines. Initial pressure drop of 4. 5 psi at a flow rate of 1 gpm. Mounting bracket for filter housings. Use with pentek #10 and #20 3/4" 3G MB housings.

Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Nominal filtration rating of 1 micron. Initial pressure drop of 4 psi at a flow rate of 5 gpm. Nominal filtration rating of 5 microns. Recommended flow rate of 0

More information about Pentair Industries 150578 #ad


Similar products



Filmtec 75 GPD Filmtec Residential RO Membrane

#ad
#ad
Filmtec TW30-1812-75 #ad - 98% stabilized salt Rejection Minimum Rejection 96%. Granular activated carbon GAC media with polystyrene outer casing and end caps. Filmtec home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. The industry's most reliable for home drinking water is the Filmtec reverse osmosis membrane elements.

Bonded pac media with a polyolefin core and shell. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Nominal filtration rating of 1 micron. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. 75 gallon per day 7. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity.

Filmtec 75 GPD Filmtec Residential RO Membrane #ad - Initial pressure drop of 4 psi at a flow rate of 5 gpm. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 5 microns. Note: the tw30 is the new part number printed on the membrane and replaces the BW60, they are identical and the same thing.

8" x 12" residential RO membrane housings.

More information about Filmtec TW30-1812-75 #ad


Similar products